What we do

Solar panel, gutter and fascia cleaning

Three services, one goal: keeping your property working properly and looking its best. Covering Dorset, Hampshire and Wiltshire.

Service one

Solar panel cleaning

A full deep clean of your panels using approved solutions to remove stubborn lichen, algae and bird droppings. We always finish with a pure water rinse to prevent streaking, leaving your panels as close as possible to the condition they were first fitted in.

  • Full deep clean, not just a rinse
  • Approved cleaning solutions, safe for panels
  • Removes stubborn lichen and bird droppings
  • Finished with a pure water rinse, no streaking
  • Works on single and double storey properties
Get a quote
Solar panel cleaning in progress

How it works

Our cleaning process

Straightforward, thorough, and designed to protect your panels while getting them properly clean.

Cleaning solar panels with a pole brush and pure water system
1

Assess

We take a look at your panels, how many you have, and the access needed, whether you're single or double storey.

2

Deep clean

Using approved solutions, we work over every panel to lift stubborn lichen, algae and bird droppings.

3

Pure water rinse

Every clean finishes with a pure water rinse, leaving panels streak free and looking their best.

4

Generating more

With sunlight no longer blocked by grime, your panels are back to working as they should.

Why it matters

Dirty panels cost you more than they let on

Panels are built to sit outside all year round, which means they are constantly exposed to whatever the weather and the environment bring their way.

It builds up gradually

Dust, pollen, moss and bird droppings settle on the glass over time, often without any obvious sign from ground level. Rain alone does not wash everything away, and light rain can sometimes just move dust around, leaving streaks that dry into a stubborn residue.

Bird droppings cause hotspots

Droppings tend to concentrate in a small area, creating a shaded patch that behaves differently to the rest of the panel. Left alone, this can stress the cell underneath rather than simply sitting on the surface.

Moss lifts panel edges

Moss and lichen creep in from roof edges and, if left, can lift panels and block drainage channels, trapping moisture against the frame. Panels near trees, chimneys or roof edges tend to collect more debris than the rest of the array.

Worth checking

Signs your panels need cleaning

Because dirt builds up gradually, it is easy to miss the early warning signs and only notice a problem once output has dropped quite noticeably. A few things are worth keeping an eye on.

  • Visible dust or grime on the panel surface
  • Streaking that appears after rain
  • Patches of moss or lichen near the edges
  • A noticeable dip in your generation app readings on a sunny day

For most UK homes, an annual clean is generally enough, though properties near trees, farmland or busy roads may benefit from a clean every six months, since these environments tend to generate more debris throughout the year.

Solar panel showing lichen build-up before cleaning
Gutter cleaning in progress

Also available

Gutter cleaning

Blocked gutters are one of the most common causes of damp and water damage to a property. Leaves, moss and general debris build up over time, and once a gutter is blocked, rainwater has nowhere to go except over the edge and down your walls. We clear your gutters properly and check that your downpipes are flowing freely, so water is carried away from your roof and walls the way it's meant to be.

  • Full clear-out of leaves, moss and built up debris
  • Downpipes checked to make sure water flows away freely
  • Helps prevent damp, overflow and water damage to walls
  • Works on single and double storey properties
Get a quote

Also available

Fascia cleaning

Your fascias and soffits are the uPVC trim that runs along the edge of your roofline. Over time they collect dirt, algae and general grime, which leaves white or cream uPVC looking dull and patchy even though the boards themselves are usually fine. A proper clean brightens them back up and gives the whole roofline a smarter, well kept finish, without needing to replace anything.

  • Removes dirt, algae and grime from fascia and soffit boards
  • Brightens uPVC without harsh chemicals that can damage the surface
  • Instantly improves the kerb appeal of your property
  • Often booked alongside a gutter or solar panel clean
Get a quote
Fascia cleaning result

Approved solutions

We only use cleaning solutions approved for use on solar panels, safe and effective every time.

10 years experience

A decade of cleaning and maintaining solar panels across the South.

Local coverage

Covering Dorset, Hampshire and Wiltshire, with knowledge of the local area.

Common questions

Frequently asked questions

Everything you might want to know before booking a clean.

It typically involves a soft brush wash using purified water, sometimes combined with a light solution for stubborn marks such as dried sap or ingrained dust. The process is deliberately gentle, since the goal is to lift away the build-up without scratching the glass or disturbing the seals around the frame.

Yes, when carried out correctly. We avoid abrasive tools and high-pressure jets, which can damage seals or coatings, and we use purified water rather than tap water so it dries without leaving spots or streaks behind.

A typical domestic clean takes between one and two hours, depending on the size of the array and roof access. Straightforward single storey properties usually finish towards the shorter end of that range.

For most UK homes, an annual clean is generally sufficient. Properties near trees, farmland or busy roads may benefit from cleaning every six months, since these environments tend to generate more debris throughout the year.

Not necessarily, though it helps if someone can grant access to a water supply or confirm any specific access points beforehand, such as gates or side access. We will confirm exactly what is needed when the appointment is booked.

Yes. Commercial arrays are often larger and mounted on flat or industrial roofs, so scheduling tends to matter more, fitting around business hours or operational downtime. Get in touch to talk through your site and we can plan around what works for you.

Most properties benefit from a gutter clean at least once or twice a year, typically spring and autumn. Properties with overhanging trees nearby may need clearing more often, since leaves and debris build up faster.

Yes, many customers book more than one service together since we're already on site with the right access equipment. Just let us know what you'd like doing when you get in touch and we'll quote for the full job.

Ready to get more from your panels?

Get a free, no-obligation quote. Just let us know how many panels you have and whether your property is single or double storey.